Products

2
Yes
None
1
1000000
/products/

Products

Thumbnail
Sort By:

Model

CE & UKCA
NIOSH
MK610-R95OV

R95 Disposable Particulate Respirator 

Our R95 respirators provide greater than 95% filter efficiency against oil and non-oil-based particulate aerosols. The R95 is somewhat resistant to oils, according to NIOSH standards. They are extremely durable, have a soft and comfortable inner surface, an adjustable nosepiece and secure headstraps to provide proper fit. These respirators are loaded with a high quality activated carbon material to provide long lasting relief and reduce worker fatigue.

NIOSH Approval: TC-84A-7619

     

9800V-N95

N95 Silicon Seal Respirator with Valve

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have head straps to provide a proper fit.

NIOSH Approval TC-84A-9055

9800-N95

N95 Silicon Seal Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, and secure headstraps to provide proper fit.

NIOSH Approval TC-84A-9049

SEKURA-511

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured head straps to provide a proper fit. SEKURA-511 has neck-worn adjustable buckle design. Adjustable to reach better fit for all face types, and easy to wear with use of helmet or safety glasses.

NIOSH Approval: TC-84A-6666

SEKURA-321

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured head straps to provide a proper fit. SEKURA-321 has neck-worn adjustable buckle design. Adjustable to reach better fit for all face types, and easy to wear with use of helmet or safety glasses.

NIOSH Approval: TC-84A-6660

SEKURA-N95V

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. These mask are intended to be used for protection against solid, such as those from minerals, coal, iron ore, flour and certain other substance. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

NIOSH Approval: TC-84A-7643

MAK368+

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured head straps to provide a proper fit. MAK368+ has neck-worn adjustable buckle design.Adjustable to reach better fit for all face types, and easy to wear with use of helmet or safety glasses.

NIOSH Approval: TC-84A-7774

MAK520+

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured head straps to provide a proper fit. MAK520+ has neck-worn adjustable buckle design. Adjustable to reach better fit for all face types, and easy to wear with use of helmet or safety glasses.

NIOSH Approval: TC-84A-7773

SEKURA-N95

N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of N95. These mask are intended to be used for protection against solid, such as those from minerals, coal, iron ore, flour and certain other substance. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

NIOSH Approval: TC-84A-7638

MAK699+

N95 Disposable Particulate Respirator with Exhalation Valve

This product has been tested and meets the NIOSH standard of N95. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured head straps to provide a proper fit. MAK699+ has neck-worn adjustable buckle design. Adjustable to reach better fit for all face types, and easy to wear with use of helmet or safety glasses.

NIOSH Approval: TC-84A-7841

R95-610V

R95 Disposable Particulate Respirator with Exhalation Valve

Our R95 respirators provide greater than 95% filter efficiency against oil and non-oil-based particulate aerosols. The R95 is somewhat resistant to oils, according to NIOSH standards.

Suggested applications include foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating where particles and nuisance levels of organic vapours may be present. Its lightweight construction promotes greater worker comfort and contributes to increase wear time. Makrite recommended for relief against nuisance levels of organic vapours. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.

NIOSH Approved: TC-84A-5154

P95-710VOV

P95 Particulate with Exhalation Valve

An excellent choice for work settings that involve heat, humidity and long wear periods. Suggested applications include foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating where particles and nuisance levels of organic vapours may be present. Makrite recommended for relief against nuisance levels of organic vapours. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.

NIOSH Approved: TC-84A-5041

9601-N95

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances.They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit.

NIOSH Approval:TC-84A-9225

9601-N95S

N95 Disposable Particulate Respirator

(Smaller size of 9601-N95)

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances.They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit. The size is slightly smaller than respirators in N95 series.

NIOSH Approval:TC-84A-9287

801-N95

N95

This product has been tested and meets the NIOSH standard of N95. These mask are intended to be used for protection against solid, such as those from minerals, coal, iron ore, flour and certain other substance. The N95 Series are extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and headband adjustor to provide a proper fit.

NIOSH Approval TC-84A-9223

R95-620V

R95 Disposable Particulate Respirator with Exhalation Valve

Our R95 respirators provide greater than 95% filter efficiency against oil and non-oil-based particulate aerosols. The R95 is somewhat resistant to oils, according to NIOSH standards.

Suggested applications include foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating where particles and nuisance levels of organic vapours may be present. Its lightweight construction promotes greater worker comfort and contributes to increase wear time. Makrite recommended for relief against nuisance levels of organic vapours. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.

NIOSH Approved: TC-84A-5437

9606V

N95 Disposable Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our 9606 model, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions. Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nose piece and secure head straps to provide proper fit.

Furthermore,this design has a fordable cup shape, which can reduce storage place and make wearer carry easily.

NIOSH Approval TC-84A-9498

9606

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nose piece and secure head straps to provide proper fit.

Furthermore,this design has a fordable cup shape, which can reduce storage place and make wearer carry easily.

NIOSH Approval TC-84A-9463

FIT+4803

Surgical N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. This product is extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

1. High density nose foam design provides a better and more secure seal. Intensive reseach has been done on
the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Easy to carry with a 3 panel design. Foldable and easy to use. In addition, the 3 panels provide a larger filtering area.

4. Low breathing resistance for better breathability for better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

NIOSH Approval: TC-84A-9460

9603S

Surgical N95 Disposable Particulate Respirator

9603 (Medium/Large)
9603S (Adult Small)

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. This product is extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

1. Ergonomically M shaped nose foam design provides a better and more secure seal. Intensive reseach has been done on the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Ergonomically designed to fit most facial sizes while creating maximum comfort.

4. Low breathing resistance for better breathability and better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

NIOSH Approval: TC-84A-9459

9603

Surgical N95 Disposable Particulate Respirator

9603 (Medium/Large)
9603S (Adult Small)

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. This product is extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

1. Ergonomically M shaped nose foam design provides a better and more secure seal. Intensive reseach has been done on the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Ergonomically designed to fit most facial sizes while creating maximum comfort.

4. Low breathing resistance for better breathability and better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

NIOSH Approval: TC-84A-9462

9500I

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface,also have an adjustable nose piece and secured head straps to provide proper fit.

NIOSH Approval: TC-84A-9420

SEKURA-X

Surgical N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. This product is extremely durable with a soft and comfortable inner surface, with an adjustable nose piece and secured headstraps to provide a proper fit.

NIOSH Approval: TC-84A-9316

910-N95FMX (FDA)

Surgical N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit. These masks can be used TB situations as recommended by OSHA.

NIOSH Approval TC-84A-4541

9500-N95S (FDA)

Surgical N95 Disposable Particulate Respirator.

(A smaller size for 9500-N95)

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. They are extremely durable with a soft and comfortable inner surface,also have an adjustable nose piece and secured head straps to provide proper fit. These masks have a 510(K) number for the medical market and can be used TB situations as recommended by OSHA.

NIOSH Approval: TC-84A-5463 FDA 510 (K): k020474

9500-N95 (FDA)

Surgical N95 Disposable Particulate Respirator

This product has been tested and meets the NIOSH standard of Surgical N95. The surgical N95 has demonstrated conformance to FDA specified requirements and is intended for use in all healthcare settings and for all medical purposes in which an N95 level of respiratory protection is needed to protect the wearer. They are extremely durable with a soft and comfortable inner surface,also have an adjustable nose piece and secured head straps to provide proper fit. These masks have a 510(K) number for the medical market and can be used TB situations as recommended by OSHA.

NIOSH Approval: TC-84A-5411 FDA 510 (K):K020474

MK710-P95V

P95 Particulate with Exhalation Valve

An excellent choice for work settings that involve heat, humidity and long wear periods. Suggested applications include foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating where particles and nuisance levels of organic vapours may be present.

NIOSH Approved: TC-84A-7696

MK710-P95VOV

P95 Disposable Particulate Respirator with Exhalation Valve

An excellent choice for work settings that involve heat, humidity and long wear periods. Suggested applications include foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating where particles and nuisance levels of organic vapours may be present. Makrite recommended for relief against nuisance levels of organic vapours. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.

NIOSH Approved: TC-84A-7528

9500V-N95

N95 Disposable Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. 9500-N95, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions. Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. 9500-N95 combine to offer the proper fit and durability. Special featured welding elastic which is an alternative choice for head strap.

NIOSH Approval TC-84A-5460

N95V-510W

N95 Flame Resistance Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. 510-N95W, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions.

Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. 510W-N95W combine to offer the proper fit and durability. Special featured flame resistance which is suitable for users in the welding environment.

NIOSH Approval TC-84A-4652

9500-N95VOV

N95 Disposable Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. 9500-N95, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions.

Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. 9500-N95 combine to offer the proper fit and durability. Special featured welding elastic which is an alternative choice for head strap.

NIOSH Approval TC-84A-6954

9500-N95OV

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nosepiece and secure headstraps to provide proper fit.but also when there are nuisance odors in the environment. These respirators are loaded with a high quality activated carbon material to provide long lasting relief and reduce worker fatigue.

NIOSH Approval: TC-84A-5525

8810S

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit.

NIOSH Approval: TC-84A-6953

9500-N95

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface,also have an adjustable nose piece and secured head straps to provide proper fit. These masks have a 510(K) number for the medical market and can be used TB situations as recommended by OSHA.

NIOSH Approval: TC-84A-5411 FDA 510 (K):K020474

9500-N95-Blue-Outlayer

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit. These masks have a 510(K) number for the medical market and can be used TB situations as recommended by OSHA.

NIOSH Approval: TC-84A-5411 FDA 510 (K):K020474

9600-N95

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nose piece and secure head straps to provide proper fit.

Furthermore,this design has a fordable cup shape, which can reduce storage place and make wearer carry easily.

Colour Options:

NIOSH Approval TC-84A-7867

9600-N95S

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nose piece and secure head straps to provide proper fit.

Furthermore,this design has a fordable cup shape,which can reduce storage place and make wearer carry easily.

Colour Options:

NIOSH Approval TC-84A-7871

9600V-N95

N95 Disposable Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. 9600-N95, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions. Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. 9500-N95 combine to offer the proper fit and durability. Special featured welding elastic which is an alternative choice for head strap.

Furthermore,this design has a fordable cup shape, which can reduce storage place and make wearer carry easily.

Colour Options:

NIOSH Approval TC-84A-7869

9600-N95OV

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nosepiece and secure headstraps to provide proper fit, but also when there are nuisance odors in the environment. These respirators are loaded with a high quality activated carbon material to provide long lasting relief and reduce worker fatigue.


Colour Options:

NIOSH Approval TC-84A-7882

MKN95-910V

N95 Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. MK910-N95, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions. Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. MK910-N95 combine to offer the proper fit and durability. Special featured welding elastic which is an alternative choice for head strap.

NIOSH Approval TC-84A-5409

510-N95W

N95 Flame Resistance Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nosepiece and head straps to provide a proper fit. Special featured flame resistance which is suitable for users in the welding environment.

NIOSH Approval TC-84A-4654

N95VOV-510W

N95 Flame Resistance Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. 510-N95W, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions. Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. 510-N95W combine to offer the proper fit and durability. Special featured welding elastic which is an alternative choice for head strap.

NIOSH Approval TC-84A-6955

N99-810V

N99 Disposable Particulate Respirator with Exhalation Valve

This is the High performance respirator that has the efficiency over 99%, with an exhalation valve to make it easier to breathe through in hot or protection while providing minimal exhalation resistance.

NIOSH Approval TC-84A-4081

N99-820V

N99 Disposable Particulate Respirator with Exhalation Valve

This is the High performance respirator that has the efficiency over 99%, with an exhalation valve to make it easier to breathe through in hot or protection while providing minimal exhalation resistance.

NIOSH Approval TC-84A-7639

910-N95FMX

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit. These masks can be used TB situations as recommended by OSHA.

NIOSH Approval TC-84A-4541

N95V-910FM

N95 Disposable Particulate Respirator with Exhalation Valve

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, also have an adjustable nosepiece and secured head straps to provide proper fit. These masks can be used TB situations as recommended by OSHA.

NIOSH Approval TC-84A-4542

Envi-910

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable with a soft and comfortable inner surface, this mask doesn’t has nose foam and nosepiece. Special featured welding elastic which is an alternative choice for head strap.

NIOSH Approval TC-84A-4656

Envi-910F

N95 Disposable Particulate Respirator

Envi910F Series of respirators, designed with the ultimate soft inner layer that provides the most intimate touch to the face. Adjustable looping head straps provides a more convenient way for donning and doffing. The head strap loop design which allows the mask to be hanged around the neck when not in use. Implemented filters with low breathing resistance for more comfortable wear. Soft pre-shaped nose cushion ensures excellent fit for various facial sizes.

NIOSH Approval TC-84A-6806

Envi-910FV

N95 Disposable Particulate Respirator with Exhalation Valve

Envi910FV Series of respirators, designed with the ultimate soft inner layer that provides the most intimate touch to the face. Adjustable looping head straps provides a more convenient way for donning and doffing. The head strap loop design which allows the mask to be hanged around the neck when not in use. Implemented filters with low breathing resistance for more comfortable wear. Soft pre-shaped nose cushion ensures excellent fit for various facial sizes.

NIOSH Approval TC-84A-6811

Envi-910V

N95 Disposable Particulate Respirator with Exhalation Valve

This is the same high performance respirator as our no. Envi 910, but with an exhalation valve to make it easier to breathe through in hot or humid work conditions.

Our unique exhalation valve offers maximum inhalation protection while providing minimal exhalation resistance. This feature and all those of our standard no. Envi 910 combine to offer the proper fit and durability.

NIOSH Approved: TC-84A-4657

9500-N95S

N95 Disposable Particulate Respirator.

(A smaller size for 9500-N95)

These masks are intended to be used for protection against solids, such as those from minerals, coal, iron ore, flour and certain other substances.They are extremely durable with a soft and comfortable inner surface, also have an adjustable nose piece and secured head straps to provide proper fit. These masks have a 510(K) number for the medical market and can be used TB situations as recommended by OSHA. The size is slightly smaller than respirators in N95 series.

NIOSH Approval: TC-84A-5463 FDA 510 (K): k020474

MK910-N95

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nose piece and secure headstraps to provide proper fit.

NIOSH Approval TC-84A-5408

MK910-N95S

N95 Disposable Particulate Respirator

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nosepiece and secure headstraps to provide proper fit.

NIOSH Approval TC-84A-5464

9600-N95VOV

N95 Disposable Particulate Respirator with Exhalation Valve

These masks are intended to be used for protection against solid, such as, those from minerals, coal, iron ore, flour and certain other substances. They are extremely durable, have a soft and comfortable inner surface, an adjustable nosepiece and secure headstraps to provide proper fit, but also when there are nuisance odors in the environment. These respirators are loaded with a high quality activated carbon material to provide long lasting relief and reduce worker fatigue.


Colour Options:

NIOSH Approval TC-84A-7883

CE & UKCA
MKD220V

FFP2 Disposable Particulate Respirator with Exhalation Valve

MKD220V respirator is manufactured to European EN149:2001+A1:2009 FFP2 Standard, it is approved for use against hazardous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 10 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

ENVIP2DF

FFP2 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP2DVF

FFP2 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP2DVOVF

FFP2 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP3VF

FFP3 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP3 masks are to be used in situations up to 20 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP3DF

FFP3 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP3 masks are to be used in situations up to 20 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP3DVF

FFP3 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP3 masks are to be used in situations up to 20 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

MKP2SLa

FFP2 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nose piece and a secured head straps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL).

CE 712994

UKCA 759311

MKP2SLAVa

FFP2 Disposable Particulate Respirator with Exhalation Valve

This mask has the same features as MKP2SLa , and in addition with an exhalation valve the mask provides an easy breathing in hot or humid working conditions and gives a greater comfort . The mask is to be used in the same situations as MKP2SLa . All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL) .

CE 712994

UKCA 759311

302P2OVw

FFP2 Disposable Particulate Respirator with Exhalation Valve

This mask is a FFP2 approved respirator with an additional layer of activated carbon to absorb nuisance odors. This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working connections. The exhalation valve reduces breathing resistance and provides greater comfort.

CE 718846

UKCA 759312

M613BE

Type I Medical Pleated Mask

Pleated mask is used widely different industries, including medical, dental, food service, laboratories and even daily civilian uses. This model can provide 95% BFE and meets EN14683 Rating – Type I Standard.

M623BE

Type II Medical Pleated Mask

Pleated mask is used widely different industries, including medical, dental, food service, laboratories and even daily civilian uses. This model can provide 98% BFE and meets EN14683 Rating – Type II Standard.

ENVIP2VF

FFP2 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP2 masks are to be used in situations up to 10 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP1DVF

FFP1 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP1 masks are to be used in situations up to 4 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

MKD220

FFP2 Disposable Particulate Respirator

MKD220 respirator is manufactured to European EN149:2001+A1:2009 FFP2 Standard, it is approved for use against hazardous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 10 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer Single shift use. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

MKD110V

FFP1 Disposable Particulate Respirator with Exhalation Valve

MKD110V respirator is manufactured to European EN149:2001+A1:2009 FFP1 Standard, it is approved for use against non-toxic solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 4 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

MKD110

FFP1 Disposable Particulate Respirator

MKD110 respirator is manufactured to European EN149:2001+A1:2009 FFP1 Standard, it is approved for use against non-toxic solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 4 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

CFP1SL

FFP1 Disposable Particulate Respirator 

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP1 approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/06/18/0446

CFP2SL

FFP2 Disposable Particulate Respirator 

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP2 NR without exhalation valve approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/05/19/0552

FP1VSLFMc

FFP1 Disposable Particulate Respirator with Exhalation Valve

This filter respirator is designed for applications involving dust, mists and fibers. This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 4 times the Occupational Exposure Limits (OEL). The exhalation valve reduces breathing resistance and provides greater comfort in hot and humid work conditions.

CE 712989

UKCA 759309

FP1VSLOVFM

FFP1 Disposable Particulate Respirator with Exhalation Valve

This filter respirator is designed for applications involving dust, mists and fibers. This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 4 times the Occupational Exposure Limits (OEL). The exhalation valve reduces breathing resistance and provides greater comfort in hot and humid work conditions.

CE 712989

UKCA 759309

FP2SLOVFM

FFP2 Disposable Particulate Respirator

This filter respirator is designed for applications involving dust, mists and fibers. This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 10 times the Occupational Exposure Limits (OEL).

CE 712989

UKCA 759309

FP2VSLOVFMc

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator is the same as the FP2 SLIM, but with an exhalation valve for greater worker comfort in hot and humid work conditions. These masks are to be used in the same situations and under the same conditions as the standard FFP2 masks without valve.

CE 712989

UKCA 759309

ENVIP1F

FFP1 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP1 masks are to be used in situations up to 4 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

ENVIP1DF

FFP1 Disposable Particulate Respirator

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremely durable, and they have a soft inner surface with an adjustable nosepiece and a secured headstraps for a proper fit. There is a low breathing resistance for increased workering comfort. All FFP1 masks are to be used in situations up to 4 times the Occupational Exposure Level (OEL).

CE 712990

UKCA 759310

M633BE

Type IIR Medical Pleated Mask

Pleated mask is used widely different industries, including medical, dental, food service, laboratories and even daily civilian uses. This model can provide 98% BFE and provides the fluid resistance function through the use of an extra layer without influencing the breathing comfort at all. This model  meets EN14683 Rating – Type IIR Standard.

CFP3SLAV

FFP3 Disposable Particulate Respirator with Exhalation Valve

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP3 NR with exhalaton valve approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/11/19/1191

CFP2SLAV

FFP2 Disposable Particulate Respirator with Exhalation Valve

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP2 NR with exhalation valve approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/05/19/0554

FIT-P1DSL

FFP1 Disposable Particulate Respirator

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 4 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P1DSLAV

FFP1 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 4 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P2DSL

FFP2 Disposable Particulate Respirator

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 10 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P2DSLAV

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 10 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P2DSLVOV

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 10 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. This high quality carbon material provides long lasting relief from nuisance odors and with an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P3DSL

FFP3 Disposable Particulate Respirator

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 20 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P3DSLAV

FFP3 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 20 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks.

CE 763157

UKCA 776079

FIT-P3DSLAVa

FFP3 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 20 times the Occupational Exposure Limits (OEL). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The flexible edges conform to wearers’ facial features with a tight but comfortable seal, and the fold-out front allows for the same distance from the mouth as in traditional cone-style masks. The strap adjuster allows for customized, secure fit.

CE 763157

UKCA 776079

302P2w - copy

FFP2 Disposable Particulate Respirator

This filter respirator is designed for applications involving dust, mists and fibers. This respirator meets the requirements of EN149:2001 and should be used to protect the wearer from solid, oil and water based aerosols. The respirator can be used in concentrations of contaminants up to 10 times the Occupational Exposure Limits (OEL).

CE 718846

UKCA 759312

9603

Type IIR Medical Face Mask / FFP2 Disposable Particulate Respirator

9603 (Medium/Large)
9603S (Adult Small)

This model is double-certified with European CE EN149 FFP2 NR D and CE EN14683 Type IIR, which can meet the needs of customers in both industrial and medical industries.

The headband style design is more convenient for users to adjust according to their needs. Compared with ear-loop masks, it is less likely to fall off, ensuring that the wearer can wear it more firmly during work, and also allows the wearer to hang it easily on the neck when not in use.

1. Ergonomically M shaped nose foam design provides a better and more secure seal. Intensive reseach has been done on the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Ergonomically designed to fit most facial sizes while creating maximum comfort.

4. Low breathing resistance for better breathability and better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

CE 711366

UKCA 759308

9603S

Type IIR Medical Face Mask / FFP2 Disposable Particulate Respirator

9603 (Medium/Large)
9603S (Adult Small)

This model is double-certified with European CE EN149 FFP2 NR D and CE EN14683 Type IIR, which can meet the needs of customers in both industrial and medical industries.

The headband style design is more convenient for users to adjust according to their needs. Compared with ear-loop masks, it is less likely to fall off, ensuring that the wearer can wear it more firmly during work, and also allows the wearer to hang it easily on the neck when not in use.

1. Ergonomically M shaped nose foam design provides a better and more secure seal. Intensive reseach has been done on the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Ergonomically designed to fit most facial sizes while creating maximum comfort.

4. Low breathing resistance for better breathability and better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

CE 711366

UKCA 759308

9800P2VOV

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and is intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. These respirators have long lasting durability, soft, comfortable inner surface with an silicon seal ring and adjustable straps to provide a comfortable and proper fit. This mask is designed with low breathing resistance filter media to increase user comfort. This respirator is a FFP2 approved respirator with an additional layer of activated carbon to absorb nuisance odors. This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working conditions. The exhalation valve reduces breathing resistance, and provides greater comfort in hot & humid working conditions. ALL FFP2 masks are to be used in situations up to 10 times the Occupational Exposurel Level(OEL).

CE 712994

UKCA 759311

9800P2OV

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and is intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. These respirators have long lasting durability, soft, comfortable inner surface with an silicon seal ring and adjustable straps to provide a comfortable and proper fit. This mask is designed with low breathing resistance filter media to increase user comfort. This respirator is a FFP2 approved respirator with an additional layer of activated carbon to absorb nuisance odors. This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working conditions.  ALL FFP2 masks are to be used in situations up to 10 times the Occupational Exposurel Level(OEL).

CE 712994

UKCA 759311

CFP2SLOV

FFP2 Disposable Particulate Respirator

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP2 NR without exhalation valve approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/05/19/0553

CFP2SLVOV

FFP2 Disposable Particulate Respirator with Exhalation Valve

The new CFP Comfort Series of CE APAVE approved respirators has the additional benefit of being foldable for easy storage in a worker’s pocket. The slightly different shape may be able to fit more workers in any workplace. These models have been designed to easily meet CE APAVE’s FFP2 NR with exhalation valve approval requirements for breathing resistance and filtration efficiency.

APAVE NO. 0082/2863/079/05/19/0555

MKD330Vra

FFP3 Disposable Particulate Respirator with Exhalation Valve

MKD330V respirator is manufactured to European EN149:2001+A1:2009 FFP3 Standard, it is approved for use against poisonous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 20 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

MKD220Va

FFP2 Disposable Particulate Respirator with Exhalation Valve

MKD220V respirator is manufactured to European EN149:2001+A1:2009 FFP2 Standard, it is approved for use against hazardous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 10 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

880-FFP1D

FFP1 Disposable Particulate Respirator

This respirator is manufactured to European EN149:2001+A1:2009 FFP1 Standard, it is approved for use against non-toxic solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 4 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. The mask is comfortable and durable throughout the whole shift.

CE 718846

UKCA 759312

880-FFP2D

FFP2 Disposable Particulate Respirator

This respirator is manufactured to European EN149:2001+A1:2009 FFP2 Standard, it is approved for use against hazardous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 10 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer Single shift use. The mask is comfortable and durable throughout the whole shift.

CE 718846

UKCA 759312

880-FFP2DV

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator is manufactured to European EN149:2001+A1:2009 FFP2 Standard, it is approved for use against hazardous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 10 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 718846

UKCA 759312

880-FFP3DV

FFP3 Disposable Particulate Respirator with Exhalation Valve

This respirator is manufactured to European EN149:2001+A1:2009 FFP3 Standard, it is approved for use against poisonous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 20 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 718846

UKCA 759312

9800P1V

FFP1 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and is intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. These respirators have long lasting durability, soft, comfortable inner surface with an silicon seal ring and adjustable straps to provide a comfortable and proper fit. This mask is designed with low breathing resistance filter media to increase user comfort. The exhalation valve reduces breathing resistance, and provides greater comfort in hot & humid working conditions. ALL FFP1 masks are to be used in situations up to 4 times the Occupational Exposurel Level(OEL).

CE 712994

UKCA 759311

9800P2

FFP2 Disposable Particulate Respirator

This respirator meets the requirements of EN149:2001 + A1:2009 and is intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. These respirators have long lasting durability, soft, comfortable inner surface with an silicon seal ring and adjustable straps to provide a comfortable and proper fit. This mask is designed with low breathing resistance filter media to increase user comfort. ALL FFP2 masks are to be used in situations up to 10 times the Occupational Exposurel Level(OEL).

CE 712994

UKCA 759311

9800P2V

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator meets the requirements of EN149:2001 + A1:2009 and is intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. These respirators have long lasting durability, soft, comfortable inner surface with an silicon seal ring and adjustable straps to provide a comfortable and proper fit. This mask is designed with low breathing resistance filter media to increase user comfort. The exhalation valve reduces breathing resistance, and provides greater comfort in hot & humid working conditions. ALL FFP2 masks are to be used in situations up to 10 times the Occupational Exposurel Level(OEL).

CE 712994

UKCA 759311

FIT+4803

Type IIR Medical Face Mask / FFP2 Disposable Particulate Respirator

This model is double-certified with European CE EN149 FFP2 NR D and CE EN14683 Type IIR, which can meet the needs of customers in both industrial and medical industries.

The headband style design is more convenient for users to adjust according to their needs. Compared with ear-loop masks, it is less likely to fall off, ensuring that the wearer can wear it more firmly during work, and also allows the wearer to hang it easily on the neck when not in use.

1. High density nose foam design provides a better and more secure seal. Intensive reseach has been done on
the leakage rate.

2. Mitigates the pressure on the nose bridge area by introducing new TPE head straps. TPE provides an anti-slip function when the strap is placed behind the head.

3. Easy to carry with a 3 panel design. Foldable and easy to use. In addition, the 3 panels provide a larger filtering area.

4. Low breathing resistance for better breathability for better comfort.

•  NIOSH & FDA Surgical N95
•  CE/UKCA EN149:2001+A1:2009 FFP2 NR D
•  CE/UKCA EN14683:2019 type IIR

CE 711366

UKCA 759308

MKD330Va

FFP3 Disposable Particulate Respirator with Exhalation Valve

MKD330V respirator is manufactured to European EN149:2001+A1:2009 FFP3 Standard, it is approved for use against poisonous solid and liquid aerosols, dust, mist and smoke. It is suitable for protection against harmful substances in concentration level up to 20 x OEL (Occupational Exposure Limit). Additionally, it has passed the optional Dolomite clogging test which offers excellent breathability in extremely dusty conditions with longer single shift use. With an exhalation valve which helps reduce moisture and breathing resistance build-up in hot or humid working areas. The mask is comfortable and durable throughout the whole shift.

CE 746651

UKCA 759313

FP3SLAVpw

FFP3 Disposable Particulate Respirator with Exhalation Valve

These mask are intended to be used for protection against solid and liquid aerosols in wood, cement, glass working, textile, mining and construction environments. They are extremly durable and contains a circular PVC foam for a full tight seal. ALL FFP3 masks are to be used in situations up to 20 times the Occupational Exposurel Level(OEL). The exhalation valve reduces breathing resistance and provides greater comfort in hot and humid work conditions.

Packing: 10 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP1VSLOVpw

FFP1 Disposable Particulate Respirator with Exhalation Valve

This mask is a FP1 approved respirator with an exhalation valve and an additional layer of activated carbon to absorb nuisance odors. This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working conditions. The exhalation valve device can reduce breathing resistance.

CE 711366

Packing: 10 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP2VSLOVpw

FFP2 Disposable Particulate Respirator with Exhalation Valve

This mask is a FFP2 approved respirator with an additional layer of activated carbon to absorb nuisance odors. This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working conditions . The exhalation valve device reduces breathing resistance.

Packing: 10 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP1VSLOVw

FFP1 Disposable Particulate Respirator with Exhalation Valve

These masks are intended to be used for protection against solid and liquid aerosols in wood, cement glass working, textile, mining and construction environments. They are extremely durable and they have a soft and comfortable inner surface with an adjustable nose piece and secure head straps for a proper fit. All FFP1 masks are to be used in situations up to 4 times the Occupational Exposure Level (OEL). This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid work conditions. The exhalation valve reduces breathing resistance.

Packing: 10 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP3SLw

FFP3 Disposable Particulate Respirator

This respirator can be used for protection against toxic dusts, fumes, solids and aqueous-solid aerosols. The Inner surface cotnains a circular pvc foam for a full seal. It is to be used in concentration of contaminants up to 20 times the Occupational Exposure Level (PEL). These masks should be worn for protection against asbestos fibers, zinc, cadmium, arsenic, chrome and cobalt.

Packing: 20 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP2VSLOVw

FFP2 Disposable Particulate Respirator with Exhalation Valve

This mask is a FFP2 approved respirator with an additional layer of activated carbon to absorb nuisance odors . This high quality carbon material provides long lasting relief from nuisance odors and performs well in hot and humid working connections. The exhalation valve reduces breathing resistance and provides greater comfort in hot and humid work conditions.

Packing: 10 masks/ box; 12 boxes/ case.

CE 711366

UKCA 759308

FP2VSLOVFM

FFP2 Disposable Particulate Respirator with Exhalation Valve

This respirator is the same as the FP2 SLIM, but with an exhalation valve for greater worker comfort in hot and humid work conditions. These masks are to be used in the same situations and under the same conditions as the standard FFP2 masks without valve.

CE 712989

UKCA 759309

</